Bmw Fsc Code Keygen Generator

Unpack the ZIP file (bmwcicfscgenerator.zip) in Windows (after unpacking wait for a couple of seconds for the generator to automatically download the filexml”) Open the FSC generator by clicking on “BMWCICFSCGenerator.exe” and select the 1b file you pulled from your car as described. Here is the instructions on generate BWM FSC code with FSC Code Generator software program, easy 3 steps. Equipments needed: FSC Code Generator software password:EintrachtFrankfurt. EDIABAS Tool32 software. In addition, you’ll need an ENET cable and a working EDIABAS installation on Win XP 32-bit. 64-bit will properly not work. Jan 12, 2014 BMW FSC Code CIC (2007-2012) BMW FSC Code NBT (2012-2016) BMW FSC NBT NEXT. The key we provide is life time key, never expire! Life time codes mean that once you bought this code from us,you will never have to buy another code again when upgrading in the future. Price wise this is the best deal you can get for your car. Generating the FSC code using the BMWCICNBTFSCGenerator for NBT: If you are generating NBT, copy fsc.exe in the NBTFSC directory to the tools directory. Place your XXXXXXX.fsc into your tools directory (same location as the Base64.exe) 2. Open a command prompt (DOS Screen) and go to the tools directory 3.

Is there any easier way to generate BMW FSC Code than BMW E-Sys? Yes. You can use BMWAiCoder to generate BMW FSC Code! Easy and working!

BMWAiCoder 4.6 download:

BMWAiCoder 5.0 download:

And most important thing, you need this cheap €15.99 BMW ENET Coding Cable to work with BMWAiCoder!

How to generate BMW FSC Code by BMWAiCoder?

After install BMWAiCoder, connect your car with laptop via BMW ENET cable.

Select BMWAiCoder language to use: English, French, German, Italian or Russian…

Click “DetectCar” then “Connect” to connect to the vehicle.

Click “Get ECUs List” to bring up the list of all modules.

Click the “FSC” button or select “FSC Tools” from the menu to run the FSC tool as below screen shown.

Now the FSC Tool screen will be displayed. In the left list, double-click “00DE” which means navigation or select 00DE and press “Load FSC” button.

For Country, in this example, enter 00A6, which means Korea. (You should enter the code according to your own)

Enter 0028, which is the version of this map in VerCode.

The remaining VIN or NBT / CIC information will already be entered, so there is no further change.

When you click the “Generate” button, you get FSC code created at the bottom!!!

Qui ont consulté cet article ont également consulté:

Here is an instruction on how to extract your DE (NBT) or 1B (CIC) file, generate the FSC code for BMW F series.
> 3 steps to generate BMW CIC& NBT FSC Code

Prequisites:

PSDZData Lite (lite version is fine for FDL coding, you only need the full package if you want to flash ECUs)

Token (not required to reach FSC Extended)

To get the E-sys and psdzdata files, go to

CIC PREMIUM 2014 Maps:

http://www.e90post.com/forums/showthread.php?t=893113

NBT NEXT 2015 & 2016 Maps:

http://www.e90post.com/forums/showthread.php?t=995629

How to start upESys:

if you are generating maps for NEXT then you need to follow the guide for DE

if you are generating maps for MOVE, MOTION or PREMIUM then you need to follow the guide for 1B

Extracting the DE or 1B file:

Fire up Esys

make sure your connected to the F20 (not F20_Direct) via your VIN and then in

the left hand vertical menu select FSC Extended.

For NBT (DE File):

In the Parameter section enter:

Diagnostic Address (hex) = 0x63
Click on the Identify button and the Base variant HU_NBTwill be populated
Application ID for NBT= 0xDE
Upgrade Index = 0x1

For CIC (1B File):

In the Parameter section enter:

Bmw Fsc Generator

Diagnostic Address (hex) = 0x63
Click on the Identify button and the Base variant HU_CICwill be populated
Application ID for NBT= 0x1B
Upgrade Index = 0x1

In the Action section:

Select Store FSC and move from left to the right
Click on the Read button
Click Save and and name the file in the following formatXXXXXXX.fsc where XXXXXXX is last seven letters/numbers of your VIN or your donor NBT vin if you have retrofitted the NBT.
[Optional] You can now disconnect eSys from your car as the next stages can be performed offline.

Getting the Code Generation Software:

Unzip the directory attached. The directory can be placed/run from anywhere.

Generating the FSC code using the BMW_CIC_NBT_FSC_Generator for NBT:

If you are generating NBT, copy fsc.exe in the NBT_FSC directory to the tools directory

Place your XXXXXXX.fsc into your tools directory (same location as the Base64.exe)
Open a command prompt (DOS Screen) and go to the tools directory
Type “Base64 XXXXXXX.FSC XXXXXXX_000DE001.FSC” and press enter
Open BMWFSCNBTGenerator.

exe

Click “Browse” and select the XXXXXXX_000DE001.FSC file you generated in step 3, it

should be in your tools directory.

Choose your map product from the list (For me it was “Road Map EUROPE NEXT 20151)
Click “Generate”

Generating the FSC code using the BMW_CIC_NBT_FSC_Generator for CIC:

If you are generating CIC, copy fsc.exe in the CIC_FSC directory to the tools directory

Place your XXXXXXX.fsc into your tools directory (same location as the Base64.exe)
Open a command prompt (DOS Screen) and go to the tools directory
Type “Base64 XXXXXXX.FSC XXXXXXX_0001B001.FSC” and press enter
Open BMWFSCNBTGenerator.

exe

Click “Browse” and select the XXXXXXX_0001B001.FSC file you generated in step 3, it

should be in your tools directory.

Choose your map product from the list (Road Map EUROPE PREMIUM 20141)
Click “Generate”

Preparing the USB stick:

Takes about 45 mins to upload the Maps to your car; make sure you enter the code

in CAPITALS, it has been said that you should have the car on/running during this period. But

for me just pressing the Start button once was enough. Once the update is done, you will get

a success message, wait a few minutes then turn the car on/off and then the version number

will reflect the new map.

NBT

USB stick needs to be FAT32 (32GB is enough), when you extract the map data to the stick

1 (directory)

2 (directory)

3 (directory)

4 (directory)

config.nfm

NBT_ECE_101141.3.111.pkg

NBT_ECE_101141.3.111.pkg.sig

CIC

For the PREMIUM (CIC) maps you will have 3 directories:

USB1 (directory)

USB2 (directory)

USB3 (directory)

Copy the entire contents of USB1 to the root of the USB stick, should only be the following:

config.nfm

pkgdb (directory)

What Is Bmw Fsc Code

Once uploaded to the car, the car will ask for USB2. Delete the both the config.fm and pkgdb

from the root and repeat the above with USB2….and then again with USB3.

Notes:

– What happens when NEXT/Premium 20152comes out?